Linear Programmable DC Power Supply | ODA TECHNOLOGIES

 

ODA TECHNOLOGIES provides regulated DC power supply of high quality to a variety of industries. They are designed to produce electricity with greater accuracy. Best programmable DC electronic loads are available from ODA Technologies, built to test electronic loads with accuracy and dependability.

OPE-QI Series:

The OPE-QI-QI series is a high-performance programmable power supply with an RS232C or RS485 interface based on the SCPI (Standard Commands for Programmable Instruments) protocol, and the combination of bench-top and system features in these power supplies provides versatile solutions for your design and test requirements in the industrial fields, R&D institute centers, and education fields.

Features:

Ø  16×2 Big-Character Type LCD Display

Ø  CV/CC Mode

Ø  Output ON/OFF Function

Ø  Tracking Mode Function (Control 2 output at the same time)

Ø  2 variable output & 2 fixed output

Ø  Memory Save and Recall (Up to 5 operation states)

Ø  Half of 19inch(213mm) wide x 2U size (Less than 300W)

Ø  RS-232C communication interface (RS-485 is optional)

OPE-Q Series:

The high-performance programmable DC power supply OPE-Q Series is based on the SCPI (Standard Commands for Programmable Instruments) protocol and has an RS232C or RS485 interface. Its combination of bench-top and system features offers flexible solutions for your design and testing needs in the fields of education, research and development, and industry.

Features:

Ø  3-Digit Display Resolution

Ø  16×2 Big-Character Type LCD Display

Ø  CV/CC Mode

Ø  Output ON/OFF Function

Ø  Tracking Mode Function (Control 2 output at the same time)

Ø  2 variable output & 2 fixed output

Ø  Memory Save and Recall (Up to 5 operation states)

Ø  Half of 19inch(213mm) wide x 2U size (Less than 300W)

Ø  RS-232C communication interface (RS-485 is optional)

 

If you are looking for programmable dc power supply in Korea, you can find it on ODA TECHNOLOGIES

 

Click here to contact ODA TECHNOLOGIES

 

View more: Linear Programmable DC Power Supply

Comments

Post a Comment

Popular posts from this blog

Battery Cell Charging and Discharging Test System Solutions | ODA TECHNOLOGIES

Image
  ODA TECHNOLOGIES established in 2005, improves its product performance with more advanced innovative technologies. They continuously invest in developing one-stop automation system and solution. Simplify the battery testing procedure with their battery cell charging test system and discharging test system. Their cutting-edge technology guarantees precise and trust. Key Features of Battery Module/Pack Test Solution: Ø    Charge or charge/discharge test system (CC, CV, CP) for battery pack and module  Charge/discharge test system (10V ~ 1500V, 10A ~ 2000A) for high power (2.5kW, 5 kW)  Device cycle simulation function (configurable by MX series, IPC) Ø   Independent protection function Ø   High precision measurement function Ø   Changeable capacity system by parallel connection Ø   Multi-channel configurable according to user requirements Ø   Precise charging/discharging with low voltage ripple and noise Ø   Data acquisitio...
Read more

Battery Cell Cycler | Cell Cycler | ODA TECHNOLOGIES

Image
  ODA TECHNOLOGIES was founded in 2005 with the intention of marketing measuring instruments in the field of power electronic measurement that are made in the country and are necessary for the advancement of numerous industrial fields. Get a high-precision programmable DC power supply from ODA Technologies. We provide accurate control over voltage and current using our excellent technology. Switching Type Programmable DC Power Supply MX Series: The MX series, a programmable DC power supply with switching technology, features high output power and small product size. This series' exceptional accuracy and multiple protection modes allow it to provide power and measurements without the need for additional measurement equipment. The MX Series can produce power cleanly, continuously, with minimal ripple or noise, and in a short period of time thanks to its parallel circuit optimization for high performance. Ø   High power density up to 10 kW, 15 kW in 3U Ø   Wide volt...
Read more

Battery Cell Charging and Discharging Test System Solutions | ODA TECHNOLOGIES

Image
  ODA TECHNOLOGIES CO.,LTD simplifies the battery testing procedure with our battery cell charging test system and discharging test system. ODA consistently invests its skill and expertise in creating one-stop automation systems and solutions, which enhances product performance with more advanced and creative technology. Every employee is making an effort to reach out to clients and establish themselves as not only the greatest business in the home market but also a contender against global corporations. Regenerative Battery Module/Pack Test Solution Key Features: -         Battery cell charging or discharging test system -         Based on 10kW per unit, system configurable up to 4sets by series/parallel connection and providing a Charge/Discharge system(System line-up example: 80V/200A, 100V/120A, 400V/30A, 500V/35A) -         Regenerate power by returning power to system thr...
Read more